Geos Filter

Overview

Specification

Standard Specifications of Geos Filter

Property Unit Test standard GF15 GF20 GF25 GF30 GF35 GF40 GF45 GF50
Raw material ASTM D 276 Polyester
Unit weight g/㎡ ASTM D 5261 150 200 250 300 350 400 450 500
Thickness (2kN/㎡) mm ASTM D 1777 1.2 1.4 1.8 2.6 3.0 3.3 3.6 4.0
Tensile strength, MD kN/m ASTM D 4595, ISO 10319 12 17 20 22 27 32 35 37
Tensile strength, CD kN/m ASTM D 4595, ISO 10319 7 10 12 15 17 20 22 25
Grab tensile strength, MD N ASTM D 4632 720 1,100 1,300 1,450 1,800 2,250 2,350 2,450
Grab tensile strength, CD N ASTM D 4632 540 640 850 1,050 1,350 1,450 1,500 1,600
Elongation % ASTM D 4632 60~100
Trapezoid tear strength, MD N ASTM D 4533 250 300 370 520 560 650 750 720
Trapezoid tear strength, CD N ASTM D 4533 200 240 280 360 460 470 490 500
Puncture resistance N ASTM D 4833 270 350 390 460 600 650 700 750
Permeability cm/s ASTM D 4491 ≥1×10-1
Nominal Dimensions
Roll width m 4 4 4 4 4 4 4 4
Roll length m 100/200 100/200 100/200 100 100 100 100 100
Container loading (40’HC) Approx. 40,000 30,000 24,000 20,000 16,800 15,000 13,200 12,000

※Notes :

1) All mechanical strengths given above are based on minimum values.
2) The values given are indicative and correspond to average test results obtained in our laboratory and independent authorized institutes.
3) The above specifications include some standard products in the range from 150g/m2 to 500g/m2 only. Upon request, Geos Filter up to 1,000g/m2 is available.
4) The right is reserved to make changes without notice.