Standard Specifications of Hori-Drain®
| Property | Unit | Test standard | HDEI100 | HDEI200 | HDIK200 | HDEI300 | HDIK300 | |
| Drain (Core+Filter) |
Material | PP, PE, PET | PP, PE, PET | PP, PE, PET | PP, PE, PET | PP, PE, PET | ||
| Width | ㎜ | ISO 22198, ASTM D 3774 | 100 ± 5 | 200 ± 5 | 200 ± 5 | 300 ± 5 | 300 ± 5 | |
| Thickness | ㎜ | ISO 9863-1, ASTM D 5199 | ≥9.0 | ≥9.0 | ≥9.0 | ≥9.0 | ≥9.0 | |
| Configuration |
(Reinforced corrugated core) |
|||||||
| Tensile strength | kN/width | ISO 10319, ASTM D 4595 | ≥3.0 | ≥7.0 | ≥8.0 | ≥9.0 | ≥11.0 | |
| Discharge capacity, qw, 500kPa, i=0.1 | cm3/s | ASTM D 4716 | ≥2,000 | ≥3,300 | ≥3,500 | ≥5,000 | ≥5,250 | |
| Filter | Material | PET | PET | PET | PET | PET | ||
| Grab tensile strength, MD | N | ASTM D 4632 | ≥500 | ≥500 | ≥500 | ≥500 | ≥500 | |
| Tensile strength, MD | kN/m | ISO 10319, ASTM D 4595 | ≥6.0 | ≥6.0 | ≥6.0 | ≥6.0 | ≥6.0 | |
| Elongation, MD | % | ISO 10319, ASTM D 4595 | 20~80 | 20~80 | 20~80 | 20~80 | 20~80 | |
| Tear strength, MD | N | ASTM D 4533 | ≥70 | ≥100 | ≥100 | ≥100 | ≥100 | |
| Puncture strength | N | ASTM D 4833 | – | ≥150 | ≥150 | ≥150 | ≥150 | |
| Burst strength | kPa | ASTM D 3786 | – | ≥900 | ≥900 | ≥900 | ≥900 | |
| Permeability | cm/s | ISO 11058, ASTM D 4491 | ≥1 X 10-2 | ≥1 X 10-2 | ≥1 X 10-2 | ≥1 X 10-2 | ≥1 X 10-2 | |
| Opening size, O95 | ㎛ | ASTM D 4751 | ≤75 | ≤75 | ≤75 | ≤75 | ≤75 | |
※ Notes:
1) Discharge capacity, qw, is based on index test with rigid-rigid bedding condition and calculated based on qw = Q/i x RT, where Q is the flow rate per each unit of time(m3/s), i is hydraulic gradient and RT is the temperature correction coefficient.
2) The values given are indicative and correspond to average test results obtained in our laboratory and independent authorized institutes.
3) The above information is subject to be revised according to new developments and findings.